|
|
Teledyne Hastings Mass Flow Controllers
 |
LOW CAPACITY MASS FLOWMETER & CONTROLLERHFM 200, HFC 202
• FS Ranges from 10 to 30,000 sccm (N2 Equivalent) • Accuracy ±1% of Full Scale • Operating Pressure– 500 psi Standard, 1000 psi Optional • NIST Traceable Calibration • Proven Reliability • Optional Features Include– Fittings, O-Ring Seals, Fast Response Circuitry, High Pressure Rating and Oxygen Service Cleaning • Wetted Materials Include– 316 SS, Nickel, Viton®, 87/13 Au/Ni Braze, Teflon® • Accessories Include– Power Supplies/Readout and Cables
|
 |
MEDIUM CAPACITY MASS FLOWMETER & CONTROLLERHFM 201, HFC 203
• FS Ranges from 50 to 500 slm (Air Equivalent) • Accuracy ±1% of Full Scale • Operating Pressure– 500 psi Standard, 1000 psi Optional • NIST Traceable Calibration • Proven Reliability • Optional Features Include– Fittings, O-Ring Seals, Fast Response Circuitry, High Pressure Rating and Oxygen Service Cleaning • Wetted Materials Include– 316 SS, Nickel, Viton, 87/13 Au/Ni Braze, Teflon • Accessories Include– Power Supplies/Readout and Cables
|
 |
HIGH CAPACITY MASS FLOWMETERHFM-200 with LFE (Laminar Flow Element)
• FS Ranges from 25 to 15,000 slm (Air Equivalent) • Accuracy ±1% of Full Scale • Inherently Linear Response • Lowest Pressure Drop • Excellent Rangeability • Modular Construction • 15-Pin “D” Connector • NIST Traceable Calibration
LFE CONFIGURATIONS FLOWMETER
• FS Ranges from 25 to 15,000 slm • All Welded, Modular Construction • Available in Various Sizes and Configurations from 3/8" NPT Up To 8" Flanged • NIST Traceable Calibration
|
 |
NALL SERIES MASS FLOWMETER
• FS Ranges from 10 sccm to 500 scfm • High Temperature Option to 200°C • Working Pressures up to 1000 psig • Hermetically Sealed Transducer • 15 Standard Flow Ranges |
 |
METALINE® MASS FLOWMETER & CONTROLLERHFM-300, HFC-302
• FS Ranges from 5 to 30,000 sccm (N2 Equivalent) • Accuracy ±0.75% of Full-Scale @ 3 Sigma • Settling Time < 500 msec (Model 300), 750 msec (Model 302) • Operating Pressure– 500 psi Standard, 1000 psi Optional • NIST Traceable Calibration • Low Wetted Surface Area • Large Diameter Sensor Tube • Wetted Materials Include– 302 SS, 316L SS, Nickel 200, Kalrez®
|
 |
300 SERIES MASS FLOWMETER & CONTROLLER
HFM-301, HFC-303
• FS Ranges from 25 to 1000 slm (Air Equivalent) • Accuracy ±1.0% of Full-Scale • Rapid Settling Time < 0.4 seconds (Model 301), < 2.0 seconds (Model 303) • Operating Pressure– 500 psi Standard, 1000 psi Optional • NIST Traceable Calibration • Wetted Materials Include– Viton, 302 SS, 316L SS, Nickel 200, Kalrez, Au/Ni Braze
|
 |
300 SERIES MASS FLOWMETER & CONTROLLER
HFM-305, HFC-307
• FS Ranges from 1000 to 2500 slm (Air Equivalent) • Accuracy ±1% of Full-Scale • Higher Flow Limits up to 3000 with Accuracy of ±2% • Rapid Settling Time < 0.4 seconds (Model 305), < 2.0 seconds (Model 307) • Operating Pressure– 500 psi • NIST Traceable Calibration • Wetted Materials Include– 302SS, 316SS, Nickel 200, Viton, Kalrez (Valve Seat), Teflon |
| Power Supplies |
|
 |
THPS-400
• Four Channels of Simultaneous Display • Independent Channel Program-mability • Displays: Flow, Pressure, Totalizer, Filtered Readings, Gas ID and Units-of-Measure • Totalizer Set Points with Count-up and Count-down Capability • High and Low Set Points • Analog I/O 0-5 VDC, 0-10 VDC, 4-20 mA • Analog Signals Available on Back Panel • Ratio Control • User Selectable AC Input • RS232/485 or Ethernet
THPS-100
• Single Channel Power Supply for Flowmeters, Controllers and All-Media Pressure Transducers • 100 to 240 VAC • 4-1/2 Digital LCD Display • Alarm Outputs, RS232 |
 |
DIGITAL METALINE® MASS FLOWMETER & CONTROLLER HFM-D-300, HFC-D-302
• FS Ranges from 5 to 30,000 sccm (N2 Equivalent) • Multiple Gas Calibrations • Accuracy ±(0.50% of Reading, ±0.2% Full Scale) • Linear Sensor and Flow Divider Design • NIST Traceable Calibration • Low Wetted Surface Area • Large Diameter Sensor Tube • Wetted Materials Include– 302 SS, 316L SS, Nickel 200, Kalrez • 4ì Ra finish available • ±12, ±15 or 24 VDC Power Supply • Isolated Outputs • RS232 or RS485 up to 19.2K baud • Auto Zero • Runs Transparently in Analog or Digital Modes
|
 |
DIGITAL 300 SERIES MASS FLOWMETER & CONTROLLER HFM-D-301, HFC-D-303
• FS Ranges from 25 to 1000 slm (N2 Equivalent) • Multiple Gas Calibra-tions • Accuracy ±(0.50% of Reading, ±0.2% Full Scale) • Linear Sensor and Flow Divider Design • NIST Traceable Calibration • Wetted Materials Include– 302 SS, 316L SS, Nickel 200, Kalrez, Teflon • ±12, ±15 or 24 VDC Power Supply • Isolated Outputs • RS232 or RS485 up to 19.2K baud • Auto Zero • Runs Transparently in Analog or Digital Modes
|
 |
DIGITAL 300 SERIES MASS FLOWMETER & CONTROLLER HFM-D-305, HFC-D-307
• FS Ranges from 1000 to 2500 slm sccm (N2 Equivalent) • Accuracy ±(0.50% of Reading, ±0.2% Full Scale) • Multiple Gas Calibrations • Linear Sensor and Flow Divider Design • NIST Traceable Calibration • Low Wetted Surface Area • Wetted Materials Include– 302 SS, 316L SS, Nickel 200, Kalrez, Teflon • ±12, ±15 or 24 VDC Power Supply • Isolated Outputs • RS232 or RS485 up to 19.2K baud • Auto Zero • Runs Transparently in Analog or Digital Modes
|
 |
EDGECARD LOW CAPACITY MASS FLOWMETER &
CONTROLLER HFM-E-200, HFC-E-202
• FS Ranges from 10 to 30,000 sccm (N2 Equivalent) • Accuracy ±1% of Full Scale • Operating Pressure– 150 psi Standard • NIST Traceable Calibration • Proven Reliability • Optional Features Include– Fittings, O-Ring Seals, Fast Response Circuitry, High Pressure Rating and Oxygen Service Cleaning • Wetted Materials Include– 316 SS, Nickel, Viton, 87/13 Au/Ni Braze, Teflon |
| |
